Industrial Production Wall-Mounted Flowmeter Electromagnetic Water Flow Meter with Good Service MD-EL-F

Product Description

Product Description:

Electromagnetic flowmeters are suitable for measuring almost all electrically conductive liquids, as well as mud, paste and mud flow measurements. This is provided that the medium under test has at least a certain minimum conductivity. Temperature, pressure, viscosity and density have no effect on the measurement results.
It can also be used to measure corrosive media with the appropriate choice of pipe lining and electrode materials. Solid particles in the medium will not affect the measurement results. The flow sensor and the intelligent converter form a complete flowmeter in whole or separately. The product application

Application:

Clean water &sewage  
Electricity production &distribution  
Chemical & industrial pharmacy  
Food industry


Technical characteristics:

1.  No moving parts and no wear
2.  The measurement range of the process is 1: 100
3.  No clear section or flow enhancement device
4.  Measuring the flow rate of various conductive liquids
5.  Measurement results are not affected by physical properties such as temperature, pressure, viscosity, and density
6.  Strong corrosion resistance and wear resistance
7.  Measures forward / reverse flow
8.  Large LCD screen, user-friendly operation interface, easy to use
9.  Persistent EEPROM for saving configuration parameters and measurement data during power failure
10. Wide operation voltage range
11. Self-diagnosis


Specification:
 

Display	LCD display, display various flow data in real-time, m³ or L display unit
Structure	Embedded type design, integrated or split type
Measuring medium	Liquid or solid-liquid, Conductivity> 0.5μs / cm2
Measuring Range	0.05m/s~8m/s
Measurement Accuracy	Diameter  mm	Range m/s	Accuracy
	3~20	0.3 or less	±0.25%FS
		0.3~1	±1.0%R
		1~10	±0.5%R
	25~600	0.1~0.3	±0.25%FS
		0.3~1	±0.5%R
		1~10	±0.3%R
	700~3000	0.3 or less	±0.25%FS
		0.3~1	±1.0%R
		1~10	±0.5%R
	%FS: relative range,  %R: relative measurement
Caliber(mm)	6mm~2000mm
Nominal pressure	PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN420 etc.
Output	4~20mA or frequency (<5KHz), RS485, wireless transmission (optional), relay (option al)
Connection	DN6 ~ DN2000 for flange connection
Connection standard	Applicable to various pipe flange standards
Product Standards	Accuracy requirements meet JJG 1033-2007 standard
IP rating	IP65(integrated), IP67 or IP68 when split (optional)
Power supply	AC86~220V
Ambient temperature	5~55ºC
Environment humidity	<85%r.h(Non-condensing)