Product Description:
MD-FS100 Based on the thermal principle, the enclosed probe contains two resistors, one of which is heated as the detection resistance and the other is not heated as the reference resistance. When the medium flows, the heat on the heating resistance is taken away, the resistance value is changed, and the difference between the two resistances is used as the basis for judging the flow rate.
Application:
Gas-liquid dual type is used for pneumatic and hydraulic systems, can be used for circulating water, cutting fluid and lubricating oil flow detection, and pump idling protection.
Technical Parameters:
1.Set the range: 1...150cm/s(water),3...300cm/s(oil),20...2000cm/s(air)
2.Signal output: PNP,NPN,relay,Normally open + normally closed(SPDT)
3.The power supply: 24V±20%VDC or 230V±15%VAC
4.Current is switched on:Maximum 400mA(PNP or NPN), maximum 4A (relay)
5.No-load current: Maximum 80mA
6.Flow indicator: LED row (6)
7.Set way: Potentiometer setting
8.Pressure range: 100bar
9.The temperature gradient:≤4ºC/s
10.The response time: 1-13s,Typical values 2s
11.Initialization time: 8s
12.Electric protection:Invert, short circuit,
overload protection
13.Protection grade: IP67
14.Medium temperature:-20…80ºC
15.The environment temperature:-20…80ºC
16.Storage temperature: -20…100ºC
17.Connection mode:M12 plug-in/direct attachment line
18.material:
probe: Stainless steel
shell: PBT
19.weight: 0.4k
DIEMENSION:
THE WIRING DIAGRAM:
Specification:
Audited Supplier 
){kind=link}